GReddy INTERCOOLERS: Honda Civic Si 2002-05 / Type31V - Manual (Page 7)

3-4 Suction Pipe Installation
(1)Reinstall the Turbo Kit Suction Kit without the restrictor.
3-6 Bumper Modification
Cut the bumper little by little and test fit on the vehicle. Trim the area the hits the
intercooler.
Starting the Engine
(1) Check all the pipe and hose connections, then reconnect the negative side of the battery.
(2) Start the engine. While idling, check for any air leaks.
(3) After inspection, reinstall the front bumper, under cover and other stock parts that were
removed. Secure the bottom of the bumper with the intercooler bracket.
This completes the Intercooler Kit installation.