GReddy INTERCOOLERS: Honda Civic Si 2002-05 / Type31V - Manual (Page 4)

2. Removal of Stock & Turbo Kit Parts
When removing the stock parts, make sure you read over the factory
repair manual for proper procedures.
2-1 Disconnect the negative side of the battery.
2-2 Remove the undercover, and the front bumper.
2-3 Remove the bumper support beam.
2-4 Remove the two horns.
2-5 Remove the windshield washer tank.
2-6 Remove the Turbo Kit Air intake, suction pipe, the suction adapter, and the restrictor.
(refer to the Turbo Kit Installation Manual)
2-7 Remove the Turbo Kit Compression Pipe C-2, and C-3.
(refer to the Turbo Kit Installation Manual)
3. Kit Installation
3 3 3 3- - - -1 1 1 1
Intercooler Installation
(1) Install the Intercooler bracket to the body as shown using the provided spacer
(Parts used #: 17, 18, 21)
Space