GReddy AIR INTAKE SYSTEMS: Honda Accord V6 2013-14 - Manual (Page 6)

Refer to Figure C for steps 9-12
Step 8: Install the supplied nylon spacer onto the battery hold down 9 .
Step 9: Install provided trim onto the edge of the GReddy housing. Place the GReddy housing into the
vehicle as shown above 10 .
Step 10: Secure housing to the battery hold down using washer and nut provide 11 and to the bottom
factory mounting location using bolt and washer provided 12 .
Step 11: Use the isolation mount to secure to the housing to the third factory mounting location 13 .
Step 12: Install the silicone coupling with clamps onto the throttle body 14 . Do not tighten clams yet.
Figure C
INSTALL
Page 6
9
10
12
10
11
13
14