GReddy AIR INTAKE SYSTEMS: Honda Accord V6 2013-14 - Manual (Page 4)

Refer to Figure A for steps 1-6
Note: Make sure car is cool before starting this installation to avoid coolant burns.
Step 1: Pop off engine cover from grommets and remove engine cover 1 .
Step 2: Disconnet the MAF sensor, and then remove the wire harness from the OE air box 2 .
Step 3: Disconnect the crank case line from the OE tube 3 .
Step 4: Loosen the clamp connecting the OE tube to the throttle body 4 .
Step 5: Remove the two bolts holding the OE air box 5 .
Step 6: Pull out the OE air intake system out of the engine bay 6 .
REMOVAL
Page 4
1
2
3
4
6
5
5
Figure A