beautypg.com

GReddy AIR INTAKE SYSTEMS: Scion tC 2011-14 User Manual

Page 9

background image

Page 9

L

J

Refer to Figure F for steps 18-19

Step 18: Align the bracket with isolation mount and coupler, then tighten clamp with 8mm nut driver.

Install washer and nut on the isolation mount then tighten with a 10mm nut driver.

Step19: Re install all plastic tabs, bolts and adjust where needed then tighten all couplers and make

sure everything is snug in place. Installation is complete.

Figure F

INSTALL

GReddy.com