GReddy TURBO RELATED: Blow Off Valve Type FV - Manual (Page 2)

－ 2－
○ This Manual will explain the proper installation procedure of this product.
Please read this manual carefully.
○ This manual was created considering the vehicle to be completely factory spec.
○ While using this product, please keep this manual to use as a reference.
○ The notation shown below is used through out this manual.
This notation will indicate the important procedures and
instructions to prevent accidents and injury.
This notation will indicate the important procedures and
instructions to prevent life treating accidents and injury.
To install this product, the GReddy blow off valve mounting flange is required.
In addition, please prepare other necessary parts such as piping and hoses.
Product Name Description Code
Mounting Flange Aluminum １１９００４５1
♦ Install the blow off valve between the intercooler and throttle valve.
♦ If sub injectors are used make sure to mount he injectors after the blow off valve between the
blow off valve and the throttle body.
♦ On some applications, there are possibilities of engine stall if the air is released out to the
atmosphere.
It is recommended to re-circulate the sir back in to intake system before the turbo in-let
To re-circulate the air, replacement of the discharge funnel with optional re-circulation hose
adapter is required. .
※ Please prepare necessary part for installation.
Product Name Description Code
１９φ １１９００５１５
２９φ
１１９００５１６
３２φ
１１９００５１７
Re-circulation Adapter
３４φ １１９００５１８
DO NOT disassemble or mishandle this product.
This will cause the product failure and may damage the engine.
Caution
Warning
Ｉ ｍ ｐ ｏ ｒ ｔ ａ
ｎｔ
Caution
SAFETY
INFORMATION