GReddy TURBO RELATED: Subaru WRX 2002-05 / BOV Kit BRS-610 GDB - Manual (Page 6)

－ 6－
(5) Install the adapter flange to the intercooler
using the provided gasket and bolts as
shown.
《 《《 《Venting out to atmosphere Venting out to atmosphere Venting out to atmosphere Venting out to atmosphere Type Type Type Type》 》》 》
(1) Install the provided 34 ∅ plug to the air by
pass hose and use factory hose band.
(2) Install the GReddy Blow Off Valve using
the provided gasket and bolts.
(3) Reinstall the intercooler and connect the
turbo out let hose and throttle body hose.
(4) Reconnect the vacuum hose to the top of
the blow off valve and place the emblem on
the top cover.
《 《《 《Recirculation Type Recirculation Type Recirculation Type Recirculation Type》 》》 》
(1) Remove the factory air bypass hose.
※ When removing the hose mark the suction
tube side of the hose.
(2) Cut the air bypass hose as shown and
reinstall the hose to the suction tube.
Suction
tube side
Air bypass
Valve side
Cut before the bend
Factory Bolt Flat bolt