GReddy TURBO RELATED: Subaru WRX 2002-05 / BOV Kit BRS-610 GDB - Manual (Page 5)

－ 5－
(1) Disconnect the blow by hose and remove
the blow by tube off from the intercooler.
(2) Disconnect the Air Bypass Valve hose and
remove the valve.
(3) Disconnect the turbo outlet hose and
throttle hose and remove the intercooler.
(4) Remove the left blow by hose. Cut the
provided 12φ rubber hose to 650mm and
install it using the provided three way
fitting to the right blow by hose as shown.
※ To prevent the hose from interfering with
the throttle, route the hose over the
throttle body and secure the hose to the
intake manifold with the provided zip ties.
※ Secure the hose ends with the provided zip ties.
Installation Installation Installation Installation
Vacuum hose
Return hose
Blow by Tube
Turbo outlet
Throttle
Mounting bolt
Check clearance
at throttle
‹№7›
‹№9›
Secure at zip tie