GReddy FATT Full Auto Turbo Timer - Manual (Page 14)

Countdown Mode
Preset Mode
13
There are two Preset Countdown mode you can select from.
Preset mode can be set from 0 sec. to 9 min 59 sec. by increments
of 10 sec.
The factory setting is: 1 min. for P-1
3 min. for P-2
Preset Countdown Mode Setting
(1) Press the P+S button to
display P-1 or P-2. Two sec.
later, the current minimum
offset value will be displayed.
(2) By pressing the T button (once),
you can increase the preset
value by 10 sec. increments
(3) By holding down the T button
you can increase the preset
value by 30 sec. increments
(4) 3 sec. after releasing the T
button, the unit will alert a
confirmation beep. Then the
unit will switch back to P-1 or
P-2 mode.
2 sec. later
After the setting is
confirmed the preset
time will be displayed.
Ex. this show the time
set to 2 min.
Press T button to
set to the desired
countdown time.
This show P-1 being
selected.