DAVIS DriveRight Installation - OBD II (8156OBD, 8160OBD) - Manual (Page 3)

1
Introduction
This manual provides instructions and information necessary to install
DriveRight OBD. DriveRight OBD plugs into your vehicle’s OBDII
(On-Board Diagnostics II) port for a very quick and easy installation.
Note: DriveRight OBD only functions in vehicles equipped with a compatible OBDII
port. See “Appendix 1: OBDII Compatibility” on page 10 for a list of supported
OBDII protocols and vehicles.
Components
Your DriveRight OBD should come with all of the components shown
below. Please make sure you have all listed items before proceeding.
Note: Hardware includes spare pieces not required for installation.
Console and Mounting Hardware
Note: The 8160OBD does not include the display or battery.
Mounting Bracket
Battery
(CR123
3V Lithium)
Visor Clip
Right Angle Adapter Bracket
Velcro® Tape (4 pair)
Double-Sided Foam Tape (4 strips)
#6 x 1/2" Pan Head
Self-Tapping Screws (3)
#6 x 1/2" Flat Head
Self-Tapping Screws (3)
6-32 x 1/2" Flat Head
Machine Screws (3)
6-32 Nuts (3)
#6 Flat Washers (6)
#6 Split Lock Washers (6)
DriveRight Display
Tie Wraps (12)