Print test results, Voltmeter function – Actron KAL8600 User Manual
Page 8
8
©2005 SPX Corporation
All Rights Reserved.
0002-000-2745
PRINT TEST RESULTS
The analyzer has an infrared data link output compatible with a portable thermal printer.
Test results stored in memory may be printed at any time. The analyzer does not
have to be connected to an external battery to print test results. Pressing the ON/
OFF key powers the analyzer from the internal 9 volt battery. Select Print Data from
the Main Menu, aim the infrared emitter (at the top of the analyzer) at the printers
infrared receptor, and press the \ÿ key.
VOLTMETER FUNCTION
When powering the analyzer from the vehicle battery, you can read the battery volt-
age. Select Battery Voltage from the Main Menu and press the \ÿ key.
To use the analyzer as a voltmeter when powering from the 9V battery, select Voltme-
ter from the Main Menu and press the \ key. The analyzer displays the voltage
reading. For example, use the optional accessory probes to read voltage at starting/
charging components.
CAUTION! Measuring a Voltage Greater Than 30 V
DC
will Damage
the Battery Analyzer .