Telenav for Sprint Supported Devices: v5.5 for BlackBerry 8830, 8330, 8130 - Manual (Page 30)

NOTE: If you are using a Bluetooth headset, be sure to click the “$” (Speaker) key on the device while in navigation
mode so that you will be able to hear the audio prompts.
Audio Replay
If you wish to hear an updated informational message for the current route segment, simply press the Space key.
Miss a Turn?
Whenever you miss a turn, turn the wrong way, turn too early or too late, or otherwise get off the planned route to your
destination, the TeleNav GPS Navigator automatically creates a new route to your desired destination, audibly
announce, “Rerouting,” and give you a new set of instructions.
If you realize you have missed a turn or have otherwise gotten off the route, just keeping driving. TeleNav GPS
Navigator detects your current location and recalculates a new set of driving directions to get you back on track.
It may take approximately 15 to 30 seconds for TeleNav GPS Navigator to update your route. If during this process you
make additional deviations from your current route, TeleNav GPS Navigator may have to contact its servers for another
new route.
Since TeleNav GPS Navigator requires access your carrier’s network, if you are off route and outside of the carrier’s
coverage area, you must return to your carrier’s coverage area in order for TeleNav GPS Navigator to recalculate your
route.
Navigation Views
The default navigation view is 3D moving maps, but you may wish to use the 2D
Map instead. You can change the default navigation view in Share & More >>
Preferences >> Navigation (see page
58 for more information).
In the navigation screen, press the Menu button or the trackball to select from
the menu as shown in the illustration to the right.
To repeat an audio prompt during navigation, press the Space key.
When you arrive at your destination, use Menu to return to the TeleNav Main
Menu.
© TELENAV, INC. 2003-2009 PAGE 30 OF 68