Sper Scientific 850037 Large Display Conductivity Pen - Manual (Page 44)

44
Temperature
E01 The temperature circuit is
damaged; Send the pen to Sper
Scientific for repair.
E02 The temperature value is below the
range limit (0°C) or the temperature
circuit is damaged; Place the pen
in room temperature for 5 minutes,
if E02 still appears, send the pen to
Sper Scientific for repair.
E03 The temperature value is above
the range limit (50°C) or the
temperature circuit is damaged;
Place the pen in room temperature
for 5 minutes, if E03 still appears,
send the pen to Sper Scientific
for repair.