Ridetech 11037199 - Manual (Page 2)

2
1. Raise the vehicle to a safe and comfortable working height. Use jack stands to support the vehicle
with the suspension hanging freely.
2. Support the axle and remove the leaf springs, shocks, bump stops, pinion snubber and tail pipes.
Refer to the factory service manual for proper disassemble procedures.
3. The parking brake brackets will be in
the way of the 4 link and must be
removed. Loosen the parking brake
adjustment nut and remove the cable
from the frame bracket. The tack weld
can be broke loose with a hammer and
chisel. Grind the remains of the weld
smooth.
4. The rear brake line bracket on the
passenger side fame rail must also be
removed. Be careful not to cut fuel line.