Ridetech 11167197 User Manual
Ridetech For the car
350 S. St. Charles St. Jasper, In. 47546
Ph. 812.482.2932 Fax 812.634.6632
www.ridetech.com
Part # 11167197
67-69 GM “F” Body AirBar
Components:
1
90000527
Upper cradle assembly
1
90002077
Lower axle bracket - Driver
1
90002078
Lower axle bracket - Passenger
2
90001624
Lower billet Shockwave mount
2
90001617
Lower Shockwave stud - .625”
4
90002067
Aluminum spacer – lower shock bearing
2
90000144
Axle tabs (Short Tab-Inside)
2
90000524
Axle tabs (Tall Tab-Outside)
2
90000523
Shock block off plate
2
90002085
Upper bars – TT 5.75” (C-C length 9.250”)
2
90002086
Lower bar – TT 21.25” (C-C length 24.75”)
4
90001589
Threaded Kevlar lined Heim end – RH thread
4
90001591
Threaded Kevlar lined Heim end – LH thread
14
90000552
Aluminum spacers for Heim end
2
90002082
Aluminum spacer for Heim end – front, outside of lower bar
4
99752004
RH ¾” SAE jam nut – for rod end
4
99752006
LH ¾” SAE jam nut – for rod end
2
90001844
Trunk backer plate for sway bar bracket
2
70010694
Jig brackets for upper bar installation
2
99621015
5/8”-18 x 4 ½” bolt – Front of lower bar
2
99622006
5/8”-18 Nylok jam nut - Front of lower bar
2
90001107
Front Tab Backer
Hardware Kit # 99010017:
2
1/2”-13 x 1 ¼” Gr.5 bolt
Billet mount to axle bracket
2
1/2"-13 x 1 ¾” Gr.5 bolt
Billet mount to axle bracket
4
1/2”-13 Nylok nut
Billet mount to axle bracket
6
5/8”-11 x 2 ¾” Gr.5 bolt
Bar ends
6
5/8”-11 Nylok jam nut
Bar ends
2
1/2"-13 x 2 ¼” Gr.5 bolt
Upper Shockwave mount
2
1/2"-13 Nylok jam nut
Upper Shockwave mount
18
3/8”-16 x 1” Thread forming bolt Upper cradle assembly
30
3/8” SAE flat washer
Upper cradle assembly/Front cradle backer
8
7/16”-20 Nylok nut
T bolts for lower axle mount
8
3/8”-16 x 1 ¼” Gr.5 bolt
Trunk backer plate for sway bar bracket
8
3/8”-16 Nylok nut
Trunk backer plate for sway bar bracket/Front cradle backer
2
3/8”-16 x ¾” Gr. 5 bolt
Upper bar installation jig
2
3/8”-16 nut
Upper bar installation jig