Ridetech 13027199 - Manual

350 S. St. Charles St. Jasper, In. 47546
Ph. 812.482.2932 Fax 812.634.6632
www.ridetech.com
Part # 13027199
70-74 Chrysler “E” Body Rear AirBar
Components:
1
90000611 Driver side upper bar mount
1 90000612 Passenger side upper bar mount
1 90000608 Driver side upper Shockwave mount
1 90000609 Passenger side upper Shockwave mount
2 90000599 Front lower bar mount
2 90000615 Axle mounts
1 90000644 Inner support plate
1 90000610 Brake line spacer
2 90001001 Upper bars – TW 7.375” (9 ½” C-C length)
2 90001023 Lower bars – WW 21.25”
2 99250001 ¼”-28 straight grease fitting
2 90001589 Threaded Kevlar lined Heim end
2 99752004 ¾”-16 jam nut – for rod end
4 90000552 Aluminum spacer for Heim end
4 90001942 Rubber bushings - pressed into bars and rod ends
4 90001085 Poly bushing for lower bar
2 90000198 Lower bar bushing sleeve
2 90000144 Inner axle tab (Larger)
2 90000155 Outer axle tab
2 90001624 Lower billet Shockwave mount
2 90001617 5/8” shock studs w/ hardware
4 90002067 Aluminum spacer for stud
8 99566002 9/16” SAE hex nut ( For U-bolts )
8 99566003 9/16” SAE flat washer ( For U-bolts )
4 99566004 U-bolts - Axle mount
2 70010694 Jig brackets for upper bar installation
Hardware: (Part # 99010022)
2
1/2”-13 x 1 ¼” Gr. 5 bolt Billet mount to axle bracket
2 1/2"-13 x 1 ¾” Gr. 5 bolt Billet mount to axle bracket
4 1/2”-13 Gr. 5 Nylok nut Billet mount to axle bracket
1 5/16”-18 x 1 ¾” Gr. 5 bolt Brake line & spacer
1 5/16” SAE flat washer Brake line & spacer
1 5/16” lock washer Brake line & spacer
2 1/2”-13 x 2 ¾” Gr.5 bolt Upper Shockwave mount to body
2 1/2”-13 Nylok nut Upper Shockwave mount to body
4 1/2” SAE flat washer Upper Shockwave mount to body
4 5/8”-11 x 4” Gr. 5 bolt Shockwave to upper mount & front bar to body
2 5/8”-11 Gr. 5 Nylok nut Shockwave to upper mount
6 5/8” SAE flat washer Shockwave to upper mount
6 5/8”-11 x 2 ¾” Gr. 5 bolt Upper & lower bars
8 5/8”-11 Nylok jam nut Upper & lower bars
26 3/8”-16 x 1” thread forming bolt Shockwave and upper bar mounts to frame
8 3/8”-16 x 1 ¼” Gr. 5 bolt Lower front bar mount
6 3/8”-16 x 1” Gr. 5 bolt Inner support plate
4 3/8”-16 x 2 ¼” Gr. 5 bolt Inner support plate
18 3/8”-16 Nylok nut Inner support plate
48 3/8” SAE flat washers Shockwave and upper and lower bar mounts
2 3/8”-16 x ¾” Gr. 5 bolt Upper bar installation jig
2 3/8”-16 nut Upper bar installation jig