Ridetech COIL-OVER Stud Top Assembly - Manual

CoilOver Stud Top Assembly
1. Slide aluminum Stud Top Base (1) over
Threaded Stud (6).
2. Slide bottom Delrin Ball Half (2) over
threaded stud, with step facing up.
3. Place CoilOver into spring pocket with stud
protruding through factory shock hole.
Factory shock hole may need to be drilled
out to ¾”.
4. Place upper Delrin Ball Half (3) over
threaded stud, flat side down.
5. Secure the assembly with the Aluminum
Cap (4) and 12mm Nylok Nut (5).