Ridetech 11386799 - Manual (Page 6)

13. The shocks are installed as shown
to the left. [your upper shock mount
may appear slightly different] Note the
routing of the parking brake cable.
11. The upper airspring
crossmember can now be installed.
It is bolted into the top flange of the
C notch assemblies with the
panhard bar bracket on the drivers
side. This will position the airspring
mounts behind the crossmember.
The brakeline junction box may
need to be relocated slightly. The
panhard bar can now be installed.
12. Install the airsprings into the mounts. Be
sure to use the round roll down plate
provided between the airspring and the lower
bridge mount to avoid damage to the
airspring when deflated.