FanAm MD60 AC Drive - Manual (Page 127)

RJ45 Splitter Cable G-3
Connecting One Temporary Peripheral
Connecting One Temporary Peripheral and
One Permanent Peripheral
Figure G.4 – Connecting One Temporary Peripheral
M
S
MD60 Drive
Serial Converter
Parameter 1 (Module Cfg) set to "Auto"
(default) or "Master" and connected to
Master port (M) on RJ45 Splitter Cable
MD60
Handheld OIM
or
Parameter 9 (Device Type) set to "Auto"
(default) or "Master" and connected to
Master port (M) on RJ45 Splitter Cable
Figure G.5 – Connecting One Temporary Peripheral and One Permanent
Peripheral
M
MD60 Drive
S
Serial Converter
NEMA 4
Panel Mount OIM
or
NEMA 1 Bezel
with Handheld OIM
Parameter 9 (Device Type)
set to "Master" and
connected to Master port
(M) on RJ45 Splitter Cable Parameter 1 (Module Cfg)
set to "Auto" (default) or
"Slave" and connected to
Slave port (S) on
RJ45 Splitter Cable