Visionaire™ 2 and visionaire™ 3 en – AirSep MN157-1 B User Manual
Page 135
VisionAire™ 2 and VisionAire™ 3
EN
AirSep
®
Corporation
EN-9
MN157-1 rev. B
Ø Top and Side Handles:
o
Enables convenience in carrying the unit.
Ø On/Off (I/0) Power Switch:
o
Starts and stops the operation of the unit.
Ø Oxygen Outlet
o
Provides connection for a humidifier (if required) or cannula.
Ø Circuit Breaker Reset Button:
o
Resets the unit after electrical overload shutdown
Ø Flowmeter Adjustment Knob:
o
Controls the oxygen flow rate in liters per minute (LPM).
Ø Low Oxygen Concentration Indicator (optional – mandated for EU
and specific countries)
o
When equipped with an Oxygen Monitor – a warning LED
(amber) is activated on the front panel (see Section 2.6 ‘ Safety
Features’ for details)
Ø Hour Meter:
o
Records the concentrator’s cumulative hours of operation.
Ø Operating Instructions Label:
o
Directs usage of the unit.
Ø Casters:
o
Four casters enable unit to be easily moved, as needed.
Ø Specification Label:
o
Displays electrical specifications and serial number.