ADTRAN NetVanta 3000 Series - Manual (Page 7)

Bridging: NetVanta 3000 Series Routers
Page 7
Completing the Application
Configure the remote end NetVanta 3000 Series Router similarly to the local site, with only one
frame relay sub-interface for the multipoint application. The remote PPP site is similar to the local
site shown previously. Both the local and remote NetVanta 3000 Series Routers will have distinct
host addresses assigned to the respective Ethernet ports, and they will be in the same subnet.
If you experience any problems using your ADTRAN product, please contact ADTRAN Technical
Support (1.888.4ADTRAN or 1.256.963.8716).
DISCLAIMER
ADTRAN provides the foregoing application description solely for the reader's consideration and
study, and without any representation or suggestion that the foregoing application is or may be free
from claims of third parties for infringement of intellectual property rights, including but not limited to,
direct and contributory infringement as well as for active inducement to infringe. In addition, the
reader's attention is drawn to the following disclaimer with regard to the reader's use of the foregoing
material in products and/or systems. That is:
ADTRAN SPECIFICALLY DISCLAIMS ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
BUT NOT LIMITED TO, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN
NO EVENT SHALL ADTRAN BE LIABLE FOR ANY LOSS OR DAMAGE, AND FOR PERSONAL
INJURY, INCLUDING BUT NOT LIMITED TO, COMPENSATORY, SPECIAL, INCIDENTAL,
CONSEQUENTIAL, OR OTHER DAMAGES.