HP 3PAR Operating System Software - Manual (Page 21)

4 Connecting to the Storage System
1. Click the Connect to the storage system link.
2. In the IP Address or Name field, do one of the following:
•
If this is the first time you are connecting to the storage system, enter the name or IP
address of the HP 3PAR StoreServ 7000 Storage system.
•
If you have already connected to the storage system one or more times, select the storage
system from the list.
3. Enter the user name and password.
To access your new HP 3PAR StoreServ 7000 Storage system for the first time, enter 3paradm
and the new password for 3paradm that you created in the Storage System Setup wizard.
CAUTION: You must configure hosts and storage for only one HP 3PAR storage system at a time.
Configuring multiple storage systems can lead to inconsistencies and operating errors.
21