HP Vectra VLi8 - Manual (Page 42)

3 Replacing Hardware Components
Replacing the CD-ROM Drive (or DVD Drive)
38 English
Replacing the CD-ROM Drive (or DVD Drive)
WARNING To avoid electrical shock and harm to your eyes by laser, do not open the laser
module. The laser module should be serviced by service personnel only. Do
not attempt to make any adjustment to the laser unit. Refer to the label on the
CD-ROM for power requirements and wavelength. This product is a class 1
laser product.
In the Desktop
1 Remove the computer’s cover (described in this chapter).
2 Remove the drive’s connectors. (If there is another drive in the same
bay, remove its connectors too.)
3 Pull out the sliding latch ➊ and remove the drive bay ➋ .
➋
➊
gap.bk : gap-3.fb4 Page 38 Friday, January 15, 1999 5:03 PM