Replacing the hard disk drive – HP Vectra VLi8 User Manual

Page 39

English

3 Replacing Hardware Components

Replacing the Hard Disk Drive

For information about recovering the disk drive contents, refer to the
Troubleshooting and Upgrade Guide, available on HP’s web site

www.hp.com/go/vectrasupport

In the Desktop

1 Remove the computer’s cover (described in this chapter).

2 Remove the drive’s connectors.

3 Remove the retaining screw

➊

and slide out the drive tray

➋

4 Loosen the tray’s four screws and remove the old hard drive.

5 Align the new hard drive in the tray (with the correct orientation)

and tighten the screws.

➊

➋

gap.bk : gap-3.fb4 Page 35 Friday, January 15, 1999 5:03 PM