HP Vectra VLi8 - Manual (Page 12)

1 Setting Up and Using Your PC
Connecting the Power Cords
8 English
Connecting the Power Cords
WARNING For your safety, always connect the equipment to a grounded wall outlet.
Always use a power cable with a properly grounded plug such as the one
provided with this equipment or in compliance with your national regulations.
This PC is disconnected from the power by removing the power cord from the
power outlet. This means the PC must be located close to a power outlet that
is easily accessible.
1 Remove the warning label covering the PC’s power connector, and
ensure that the voltage setting is correct for your country. (The
voltage is set during manufacture and should be already correct.)
2 Connect the power cords to the monitor and the computer. (The
connectors are shaped to go in one way only.)
3 Connect the monitor’s power cord and the computer’s power cord to
a grounded outlet.
Voltage
Selection
Switch
Voltage
Selection
Switch
gap.bk : gap-1.fb4 Page 8 Friday, January 15, 1999 5:03 PM