HP Deskjet 832c Printer - Manual (Page 53)

46
Creative Printing 3
It isn’t absolutely necessary to use the Best print quality, but it gives the best
results. You can get terrific results, with faster printing, by using the Normal
print quality. If you’re in a hurry, use EconoFast print quality.
3 Flip up the OUT tray for a better view of the IN tray.
4 Put the transparencies in your
printer with the rough side
down and the adhesive strip
forward. (You can peel off the
adhesive strip after printing.)
5 Slide in the paper adjusters,
just as you would for plain
paper. Push the IN tray back in
and flip the OUT tray down.
6 Click the Print button.
7 Be patient when printing on HP Premium Inkjet Transparency Film or if printing
on HP Premium Inkjet Rapid-Dry Transparencies in
Best mode.
Because the printer uses more ink, lays the colors down more slowly, and
allows for a longer drying time between sheets, transparencies take a while to
print.
After you are done printing:
Remove any remaining transparencies from the IN tray and replace them with
whatever paper you’ll print next.
What if the ink never dries or there are cracks in the solid blocks of color?
• You might have printed on the wrong side of the transparency. Make sure to put
it into the printer rough side down.
• You might be trying to print on a transparency that wasn’t meant for an inkjet
printer.
What if the quality isn’t what you were expecting?
You might not have chosen the right paper type and print quality. Follow the
steps in the procedure above, and print the document again.
6410038
Adhesive
Strip
C6411-90053_VeniceFixed.book Page 46 Monday, June 28, 1999 11:50 AM