HP Deskjet 832c Printer - Manual (Page 22)

15
Using Your Printer Software 2
Detailed Instructions for Using Special Features
1 If you haven’t already selected the HP DeskJet printer in the Chooser, do so now.
If you have not selected the HP DeskJet printer, go to “Choosing Your Printer”
on page 11. If you have selected the HP DeskJet and it’s the only printer you
ever use, you won’t need to do it again. If you do need to switch, go to
“Switching between printers” on page 19.
2 Load the paper, envelopes, or other media into the printer, as described in
chapter 3, “Creative Printing” which begins on page 30.
3 While the document is active on your screen, choose Page Setup from the File
menu.
4 Make adjustments in the following dialog box:
• Use the Page Size pop-up to specify the size of paper that is in your paper tray.
• Set Scaling if you want.
• Choose landscape or portrait Orientation.
If you want a
watermark on
every page,
choose Watermark
from this pop-up
menu.
To indicate the size of the paper in the
paper tray, use this pop-up menu.
To set the
Scaling, enter a
number from 5
to 999. Numbers
smaller than
100 reduce the
image; numbers
greater than 100
enlarge it.
Changing the
size may change
the pagination.
Choose the
settings you
want, then click
OK.
IMPORTANT! Make sure you correctly indicate the size of the paper,
envelopes, or other media you have in the paper tray. If you change the paper
size in this dialog box, you might also want to look over your document to see
if any of the page breaks have changed. For information on non-standard
sizes, see “How to Print on Different Paper Sizes” on page 34.
C6411-90053_VeniceFixed.book Page 15 Monday, June 28, 1999 11:50 AM