HP XP Business Copy Software User Manual
Page 105
Table 39 Error Code and Error Contents When Operating RAID Manager (continued)
Error Contents
Error Code (SSB2)
Error Code (SSB1)
Because the P-VOL and S-VOL were being split by using steady split,
the pairresync operation was rejected.
2354
b9a0/b9a1/b9a2/
b9a5/b9a6/b9ae/
b9af
The pair creation was rejected because the volume specified as the
S-VOL was the P-VOL of the splitting pair or the P-VOL of the pair where
the reverse copy operation or quick restore operation is being
performed.
2357
Because the volume specified as the S-VOL was the P-VOL of the splitting
pair, the pairresync operation was rejected.
2358
The volume specified as a P-VOL was a P-VOL of an XP Continuous
Access synchronous or asynchronous pair. Because the status of the
XP Continuous Access pair was not Suspend, the Reverse Copy or the
Quick Restore operation was rejected.
235b
The volume specified as a P-VOL was an S-VOL of an XP Continuous
Access synchronous or asynchronous pair. Because the status of the
XP Continuous Access pair was not Suspend, the Reverse Copy or the
Quick Restore operation was rejected.
235c
The volume specified as an S-VOL was a P-VOL of an XP Continuous
Access synchronous or asynchronous pair. Because the status of the
XP Continuous Access pair was not Suspend, the Reverse Copy or the
Quick Restore operation was rejected.
235d
Because the volume specified as the P-VOL has the S-VOL Disable
attribute assigned by Data Retention Utility, the quick restore operation
or the reverse copy operation was rejected.
236C
Because the volume specified as the S-VOL has the S-VOL Disable
attribute assigned by Data Retention Utility, the pair operation was
rejected.
236D
Because the volume specified as the P-VOL was not mounted, the pair
operation was rejected.
2370
Because the volume specified as the P-VOL was blocked or a system
disk, the pair operation was rejected.
2371
Because the volume specified as the P-VOL was being formatted, the
pair operation was rejected.
2372
Because the volume specified as the P-VOL was a command device,
the pair operation was rejected.
2373
1.
Because the volume specified as the S-VOL was not mounted, the
pair operation was rejected.
2.
Because the MU number was 3 or more, the pair operation was
rejected.
2380
Because the volume specified as the S-VOL was blocked or a system
disk, the pair operation was rejected.
2381
Because the volume specified as the S-VOL was being formatted, the
pair operation was rejected.
2382
Because the volume specified as the S-VOL was a command device,
the pair operation was rejected.
2383
Because the volume specified as the P-VOL was a reserved volume for
XP Auto LUN, the pair operation was rejected.
2385
Because the volume specified as the S-VOL was a reserved volume for
XP Auto LUN, the pair operation was rejected.
2386
Troubleshooting When Using RAID Manager 105