HP XP Business Copy Software - Manual (Page 103)

Table 39 Error Code and Error Contents When Operating RAID Manager (continued)
Error Contents Error Code (SSB2) Error Code (SSB1)
Because the P-VOL of the specified pair was online to the host, the
quick restore operation or the reverse copy operation was rejected. 231F b9a0/b9a1/b9a2/
b9a5/b9a6/b9ae/
b9af Because the necessary shared memory was not installed, or the
initialization was not completed, the pair operation was rejected. 2322
Because the number of slots of the volume specified as the P-VOL
exceeded the upper limit, the pair operation was rejected. 2324
Because the number of slots of the volume specified as the S-VOL
exceeded the upper limit, the pair operation was rejected. 2325
Because the volume specified as the P-VOL already had three S-VOLs,
the pair creation was rejected. 2326
Because the node volume specified as the P-VOL already had two
S-VOLs, the pair creation was rejected. 2327
Because the pair configuration exceeded the number of layers of the
cascade configuration, the pair operation was rejected. 2328
Because the volume specified as the S-VOL was the S-VOL of an existing
pair, the pair operation was rejected. 2329
Because pairs that would exceed the license capacity were going to
be created, the Create Pair operation was rejected. 232a
Because the volume specified as the P-VOL was allocated as the
destination of XP Auto LUN, the pair operation was rejected. 232F
The pair operation was rejected due to one of the following causes:
1. The volume specified as the P-VOL was a reserved volume.
2. The volume specified as the P-VOL was the source volume for XP
Auto LUN.
3. The capacity of the specified P-VOL and the S-VOL was not the
same.
2331
Because the volume specified as the P-VOL already had three S-VOLs,
the pair creation was rejected. 2332
Because the volume specified as the P-VOL was not the P-VOL of the
existing pair, the pair operation was rejected. 2333
1. Because the volume specified as the P-VOL had an emulation type
that could not be handled by RAID Manager, the pair operation
was rejected.
2. Because the volume specified as the P-VOL was an intermediate
volume, the At-Time Split operation was rejected.
2334
Because the volume specified as the S-VOL had an emulation type that
could not be handled by RAID Manager, the pair operation was
rejected. 2335
Because the emulation type of the specified P-VOL was different from
the emulation type of the S-VOL, the pair operation was rejected. 2336
Troubleshooting When Using RAID Manager 103