HP ProLiant ML310e Gen8 Server - Manual (Page 52)

Hardware options installation 52
Dedicated iLO management port option
To install the component:
1. Power down the server (on page 18 ).
2. Unlock the tower bezel (on page 19 ).
3. Remove the access panel (on page 20 ).
4. Remove the air baffle (on page 21 ).
5. Remove any existing expansion board that blocks the access to the rear system fan connector.
6. Remove the rear system fan.
7. Using a flat screwdriver, toggle the knockout to loosen it, and then pull it out of the chassis.