HP ProLiant ML310e Gen8 Server User Manual

Page 36

Hardware options installation 36

For cable routing information, see "Hot-plug, SATA drive support (on page

)."

—

Connect one end of the Mini-SAS cable to the backplane and the other end to a storage
controller option (SATA and SAS drive support).

For cable routing information, see "Hot-plug, SATA and SAS drive support (on page

)."

13.

Install the drives ("

" on page

CAUTION:

To prevent improper cooling and thermal damage, do not operate the server unless

all bays are populated with either a component or a blank.

14.

Install the air baffle (on page

15.

Install the access panel (on page

16.

Install the tower bezel (on page

17.

Connect each power cord to the server.

18.

Connect each power cord to the power source.