HP ProLiant ML310e Gen8 Server - Manual (Page 42)

Hardware options installation 42
9. Install the capacitor pack.
10. Install the air baffle (on page 22 ).
11. Install the access panel (on page 21 ).
12. Lock the tower bezel.
13. Connect each power cord to the server.
14. Connect each power cord to the power source.
15. Power up the server (on page 18 ).
Optical drive option
To install the component:
1. Power down the server (on page 18 ).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Remove the tower bezel (on page 19 ).
4. Remove the access panel (on page 20 ).