HP ProLiant ML310e Gen8 Server - Manual (Page 22)

Operations 22
1. Power down the server (on page 18 ).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Unlock the tower bezel (on page 19 ).
4. Remove the access panel (on page 20 ).
5. Remove the air baffle.
Install the air baffle
1. Insert the tabs on the baffle to the slots on the rear chassis.
2. Push the front end of the baffle inside the chassis.
3. Install the access panel (on page 21 ).