HP Integrity NonStop J-Series - Manual (Page 112)

Working with Patterns
Safeguard User’s Guide — 422089-020
9 - 16
SHOW DISKFILE-PATTERN
SHOW DISKFILE-PATTERN
SHOW DISKFILE-PATTERN Example
To show the current default values for the diskfile pattern:
SHOW DISKFILE-PATTERN
THAW DISKFILE-PATTERN
THAW DISKFILE-PATTERN Example
To thaw all diskfile patterns that have a volume name ending in the letter P:
THAW DISKFILE-PATTERN $*P.*.*, ALL
SAFECOM Saved-Diskfile-Pattern Commands
Table 9-5 lists the SAFECOM saved-diskfile-pattern commands. The examples in this
section illustrate the use of these commands. For the detailed syntax of the SAFECOM
saved-diskfile-pattern security commands, see the Safeguard Reference Manual.
Patterns may be used in SPI also.
Note. Use the SYNC command to create diskfile-pattern protection records on a volume using
the saved-diskfile-pattern protection records. For information on the SYNC command, see the
Safeguard Reference Manual.
Table 9-5. Saved-Diskfile-Pattern Commands (page 1 of 2)
Command Action
ADD SAVED-DISKFILE-
PATTERN Adds a saved-diskfile-pattern record.
ALTER SAVED-DISKFILE-
PATTERN Changes one or more security attributes in the saved-diskfile-
pattern record.
DELETE SAVED-
DISKFILE-PATTERN Removes a pattern record for a saved-diskfile-pattern.
FREEZE SAVED-
DISKFILE-PATTERN
Suspends access authority to patterns described by the disk-
file pattern. Only the pattern owner, primary owner’s group
manager, and the local super ID can access the frozen pattern.
INFO SAVED-DISKFILE-
PATTERN
Displays the current attribute values of the specified saved-dis-
kfile-pattern.
RESET DISKFILE-
PATTERN
Resets the current saved-diskfile-pattern attribute values to
values predefined by the Safeguard software
. Any subsequent
ADD SAVED-DISKFILE-PATTERN commands use these pre-
defined defaults for attributes not specified in the ADD SAVED-
DISKFILE-PATTERN command.