HP StorageWorks 20 Modular Smart Array - Manual (Page 27)

HP StorageWorks Modular Smart Array 20 User Guide 4-1
at http://www.hp.com/go/msa1500cs .
4
Configuring the Enclosure Drives
The following tools are available for configuring the drives in an MSA20 enclosure:
•
The HP Array Configuration Utility (ACU)—A versatile, browser-based utility
that provides you with maximum control over the configuration parameters
•
The HP Option ROM Configuration for Arrays utility (ORCA)—A simple ROM-
based utility that runs on all operating systems
•
The MSA1500 cs Command Line Interface (CLI)—A tool for configuring and
managing an MSA1500 cs and its attached storage
NOTE: Old versions of ACU and ORCA do not support the MSA20. Before using one of these
utilities, upgrade the firmware and drivers on the external sixth-generation Smart Array
controller. The latest version of ACU is downloadable from the HP website, http://www.hp.com.
For further information about using ACU, or for conceptual information about arrays,
logical drives, and fault-tolerance methods, refer to the HP Array Configuration
Utility User Guide. This document is available on the Documentation CD provided in
the MSA20 kit.
For further information about using ORCA, and for a detailed comparison of the
features and capabilities of ORCA and ACU, refer to the user guide for the sixth-
generation controller to which the MSA20 is connected. This document is available
on the Documentation CD that was provided in the controller kit. Alternatively, you
can download a copy of the document from the appropriate controller-specific page
on the HP website,
http://www.hp.com.
For further information about using the CLI, refer to the MSA1500 cs documentation