beautypg.com

Operations, Power up the storage blade, Power down the storage blade – HP D2220sb-Storage-Blade User Manual

Page 8: Remove the d2220sb, Important safety information

background image

Operations 8

Operations

Important Safety Information

Before installing this product, read the Important Safety Information document provided.

Power up the storage blade

Observe the following guidelines before powering up the D2220sb:

Be sure that a drive is installed in the first drive bay. The partner server blade identifies and configures

any installed drives during power up. For more information, see "Drives (on page

17

)."

Be sure that drives or drive blanks are installed in the second and third drive bays. To prevent improper

cooling and thermal damage, the first three drive bays must be populated.

Be sure that the partner server blade is powered down.

Be sure that the D2220sb is installed as shown in the installation guidelines (on page

12

).

To power up the D2220sb:

1.

Install the D2220sb. The system health LED flashes amber.

2.

Power up the partner server blade. See the server blade documentation.

3.

Observe the D2220sb system health LED. When the D2220sb is recognized, the system health LED
illuminates solid green.

The D2220sb can now be viewed in Onboard Administrator.

Power down the storage blade

In systems that use the D2220sb as external data storage, be sure that the partner server blade is the first unit

to be powered down and the last to be powered back up. Taking this precaution ensures that the system and

the OS are shut down in an orderly manner.

IMPORTANT:

If installing a hot-plug device, it is not necessary to power down the D2220sb.

To power down the D2220sb, power down the partner server blade. See the server blade documentation.

Remove the D2220sb

WARNING:

To reduce the risk of personal injury from hot surfaces, allow the drives and the

internal system components to cool before touching them.

CAUTION:

To prevent damage to electrical components, properly ground the D2220sb before

beginning any installation procedure. Improper grounding can cause ESD.