Remove the access panel, Install the access panel – HP D2220sb-Storage-Blade User Manual
Page 10

Operations 10
o
Partnered with a full-height server blade
5.
Place the D2220sb on a flat, level work surface.
Remove the access panel
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION:
To prevent damage to electrical components, properly ground the server blade
before beginning any installation procedure. Improper grounding can cause ESD.
CAUTION:
Do not operate the D2220sb with the access panel open or removed. Operating the
D2220sb in this manner results in improper airflow and improper cooling that can lead to thermal
damage.
To remove the component:
1.
Power down the partner server blade.
2.
3.
Press the access panel release button.
4.
Slide the access panel toward the rear of the D2220sb.
5.
Remove the access panel.
Install the access panel
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION:
To prevent damage to electrical components, properly ground the server blade
before beginning any installation procedure. Improper grounding can cause ESD.