HP D2220sb-Storage-Blade - Manual (Page 14)

Setup 14
device bays are populated with either a component or a blank.
CAUTION: Thermal regulation is maintained only when the drive drawer is closed. The drive
drawer open alarm is triggered under the following conditions:
• A slow beep and flash (1 every 5 seconds) indicate that the drive drawer is open. The drives
are not fully protected by system air flow.
• A fast beep and flash (2 per second)—To avoid drive damage or data loss and storage blade
shutdown, close the drive drawer immediately.
When the drives reach critical temperatures, the system shuts down.
1. Install the drives (" Installing a drive " on page 17 ).
2. Remove the enclosure connector cover.
3. Do one of the following:
o To install the D2220sb with a half-height server blade, proceed with the next step.
CAUTION: Failure to install the divider in a quadrant when installing half-height blades can
result in damage to the connectors on the server blades.