HP Officejet 300 All-in-One Printer - Manual (Page 51)

2`8
Do this: For this display:
Using
these buttons:
8. Enter the fax number.
OR press Speed Dial and a
two-digit code number.
OR press a One-Touch
button.
0 through 9 Enter fax number
5554138
9. Press Enter/Save to save the
fax number you entered.
Enter/Save
Store fax now?
1=Yes
2=No
10. Press 1 to store the document
in memory until the fax start
time, or press 2 to load the
document in the fax loading
tray until the fax start time.
1
OR
2
Load document,
then press START
OR
Load document,
in fax tray
11. If you pressed 1 in step 10,
load the document and press
Start/Copy . (If the message
"Memory full" displays,
leave the entire document in
the fax loading tray until the
start time.)
OR
If you pressed 2 in step 10,
load the document and leave
it there until the start time.
You may remove the docu`
ment if you need to send
another fax or make copies;
just replace it before the start
time (shown on the bottom
line of the display).
Start/Copy
OR
Document loaded
Fax at 1:00 AM
Storing . . .
Memory used: 40%
If you want to cancel a scheduled fax: Repeat steps 1 through 5,
then press
Right Arrow to display "Cancel Send," then press
Enter/Save to cancel the scheduled fax.