HP XP Array Manager Software - Manual (Page 28)

Figure 11 Release LUSE Confirmation Dialog Box
This dialog box shows a listing of LDEVs containing LUSE volumes to be released. If the selected
LUSE volume has a path or if any other than a LUSE volume is selected, this dialog box lists only
LDEVs containing a LUSE volume to be released.
Table 10 LDEVs Containing LUSE Volumes To Be Released
Description Item
LDEV status icon and the LDKC, CU, and LDEV numbers.
•
An LDEV number ending with # (for example,
00:00:01#) indicates that the LDEV is an external
volume For details about external volumes, see the HP
StorageWorks XP24000/XP20000 External Storage
Software User Guide.
•
An LDEV number ending with V (for example, 00:00:01
V) indicates that the LDEV is a virtual volume (V-VOL)
for XP Snapshot. For details about V-VOLs, see the HP
StorageWorks XP24000/XP20000 Snapshot User
Guide.
LDKC:CU:LDEV
Emulation type of the LDEV. Emulation
Capacity of the LDEV. Capacity
Releases the LUSE volume configuration in the release list.
The released LDEVs are displayed in blue bold italics in
the LDEV information list. OK
Cancels the reset LUSE operation. Cancel
Changing LUSE Capacities
There are two ways to change the capacity of a LUSE volume:
•
Expanding LUSE capacities
To expand the capacity of a LUSE volume, select the LUSE volume that you want to expand,
and then add LDEVs or LUSE volumes; or first select LDEVs or LUSE volumes that you want to
28 Performing LUN Expansion (LUSE) Operations