HP StorageWorks XP Remote Web Console Software - Manual (Page 100)

Table 40 Error Code and Error Contents When Operating RAID Manager (continued)
Error Contents Error Code (SSB2) Error Code (SSB1)
Because the volume specified as the P-VOL was not the P-VOL of the
existing pair, the pair operation was rejected. 2333
2334 1. Because the volume specified as the P-VOL had an emulation type
that could not be handled by RAID Manager, the pair operation
was rejected.
2. Because the volume specified as the P-VOL was an intermediate
volume, the At-Time Split operation was rejected.
Because the volume specified as the S-VOL had an emulation type that
could not be handled by RAID Manager, the pair operation was
rejected. 2335
Because the emulation type of the specified P-VOL was different from
the emulation type of the S-VOL, the pair operation was rejected. 2336
2337 b9a0/b9a1/b9a2/ 1. Because the volume specified as the P-VOL was an intermediate
volume, the pair operation for the cascade configuration was
rejected.
b9a5/b9a6/b9ae/
b9af
2. The pair operation was rejected because the specified P-VOL and
S-VOL were LUSE volumes but the number of volumes composing
the P-VOL did not match the number of volumes composing the
S-VOL.
Because the volume specified as the P-VOL was not an XP Business
Copy P-VOL, the pairresync was rejected. 233A
Because the volume specified as the S-VOL was a root volume, the pair
operation was rejected. 233B
Because the volume specified as the S-VOL was a node volume, and
the volume specified as the P-VOL was not the P-VOL for the specified
S-VOL, the pair operation was rejected. 233C
Because the specified P-VOL and S-VOL were an L2 pair, and the L1
pair status was not PSUS, the pairsplit was rejected. 233D
Because the volume specified as the P-VOL was used as the P-VOL of
the XP Continuous Access pair (Synchronous and Asynchronous), the
pair operation was rejected. 233E
Because the volume specified as the S-VOL was the P-VOL of the XP
Continuous Access pair (Synchronous and Asynchronous) and the pair
status was not PSUS or PSUE, the pair operation was rejected. 233F
Because the volume specified as the S-VOL was the destination of XP
Auto LUN, the pair operation was rejected. 2342
Because the volume specified as the S-VOL had already been an S-VOL,
the pair creation was rejected. 2343
Because the volume specified as the S-VOL for XP Business Copy pair
operations was not an S-VOL, the pair operation was rejected. 2344
The volume specified as an S-VOL was a P-VOL of an XP Continuous
Access synchronous or asynchronous pair. Because the status of the
XP Continuous Access pair was invalid, the Pair operation was rejected. 2346
The volume specified as an S-VOL was an S-VOL of an XP Continuous
Access synchronous or asynchronous pair. Because the status of the
XP Continuous Access pair was invalid, the Pair operation was rejected. 2347
Because the volume specified as the S-VOL was an intermediate volume,
the pair creation for the cascade configuration was rejected. 234a
100 Troubleshooting