HP ProBook 5220m Notebook PC - Manual (Page 99)

7. Slide the service access door latches (1) inward. Slide the service access door toward the battery
bay. Then lift up the forward edge of the service access door and remove the door (2).
8. Remove the existing memory module:
a. Pull apart the retention clips (1) at the sides of the memory module.
The memory module tilts up.
CAUTION: To prevent damage to the memory module, hold the memory module by the
edges only. Do not touch the components on the memory module.
b. Grasp the edge of the memory module (2), and gently pull the module out of the memory
module slot.
To protect a memory module after removal, place it in an electrostatic-safe container.
87