Entering a drivelock password, Changing a drivelock password – HP ProBook 5220m Notebook PC User Manual
Page 107
NOTE:
The DriveLock confirmation is case sensitive.
11.
To save your changes and exit Computer Setup, click Save in the lower-left corner of the screen,
and then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save Changes and Exit, and then press
enter
.
Your changes go into effect when the computer restarts.
Entering a DriveLock password
Be sure that the hard drive is inserted into the computer (not into an optional docking device or external
MultiBay).
At the DriveLock Password prompt, type your user or master password (using the same kind of keys
you used to set the password), and then press
enter
.
After 2 incorrect attempts to enter the password, you must shut down the computer and try again.
Changing a DriveLock password
To change a DriveLock password in Computer Setup, follow these steps:
1.
Turn on the computer, and then press
esc
while the “Press the ESC key for Startup Menu” message
is displayed at the bottom of the screen.
2.
Press
f10
to enter BIOS Setup.
3.
Use a pointing device or the arrow keys to select Security > DriveLock Passwords, and then
press
enter
.
4.
Use a pointing device to select an internal hard drive.
– or –
Use the arrow keys to select an internal hard drive, and then press
enter
.
5.
Use a pointing device or the arrow keys to select the password you want to change.
6.
When prompted, type your current password, and then press
enter
.
7.
When prompted, type a new password, and then press
enter
.
8.
When prompted, type the new password again to confirm, and then press
enter
.
9.
To save your changes and exit Computer Setup, click Save in the lower-left corner of the screen,
and then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save Changes and Exit, and then press
enter
.
Your changes go into effect when the computer restarts.
Using passwords
95