HP ProBook 5220m Notebook PC - Manual (Page 133)

Select To do this
Built-In Device Options ● Enable/disable the wireless button state (enabled by
default).
● Enable/disable the embedded WLAN device (enabled by
default).
● Enable/disable embedded WWAN device radio (select
models only; enabled by default).
● Enable/disable embedded Bluetooth® device radio
(enabled by default).
● Enable/disable the Network Interface Controller (LAN)
(enabled by default).
● Enable/disable LAN/WLAN switching (disabled by
default).
● Set the wake on LAN state. Options include the
following:
◦ Disabled
◦ Boot to Network (set by default)
◦ Follow Boot Order
● Enable/disable the fingerprint device (enabled by
default).
● Enable/disable a modem device (enabled by default).
● Enable the ambient light sensor (enabled by default).
● Enable/disable the Notebook Multibay device (enabled by
default).
● Enable/disable the integrated camera (select models only;
enabled by default).
● Enable/disable the power monitor circuit (enabled by
default).
● Enable/disable the audio device (enabled by default).
● Enable/disable optical disc drive (enabled by default).
● Enable/disable internal microphone (enabled by default).
● Enable/disable the internal speakers (enabled by default).
Port Options (all are enabled by default) NOTE: All port options are enabled by default.
● Enable/disable the Smart Card slot.
● Enable/disable the flash media reader.
● Enable/disable the USB port.
CAUTION: Disabling the USB port also disables
MultiBay devices on the advanced port replicator.
● Enable/disable the 1394 port.
● Enable/disable the eSATA port.
Computer Setup menus 121