HP ProLiant BL495c G5 Server-Blade - Manual (Page 40)

• Testing server hardware using the Insight Diagnostics Utility (" HP Insight Diagnostics " on page 49 )
Installing software drivers directly from t • he CD. With systems that have internet connection, the
lity (on page
ssentials Foundation Pack. For more information about
nt Essentials Foundation Pack or the HP website
SmartStart Autorun Menu provides access to a complete list of ProLiant system software.
• Enabling access to the Array Configuration Utility (on page 42 ), Array Diagnostic Uti
50 ), and Erase Utility (on page 44 )
SmartStart is included in the HP ProLiant E
SmartStart software, refer to the HP ProLia
(
http://h18013.www1.hp.com/products/servers/management/smartstart/index.html ).
HP RO
oLiant servers that performs a wide range of configuration
ng:
led options
features
formation
• Configuring memory options
guage selection
HP ROM-Based Setup Utility User Guide on the Documentation CD
M-Based Setup Utility
RBSU is a configuration utility embedded in Pr
activities that can include the followi
• Configuring system devices and instal
• Enabling and disabling system
• Displaying system in
• Selecting the primary boot controller
• Lan
For more information on RBSU, see the
or the HP website (
http://www.hp.com/support/smartstart/documentation ).
Using R SU
s
To ac
• na
• To m
B
To u e RBSU, use the following keys:
• cess RBSU, press the F9 key during power-up when prompted.
vigate the menu system, use the arrow keys.
ake selections, press the
To
Enter key.
• To access Help for a highlighted configuration option, press the F1 key.
IMPORTANT: RBSU automatically saves settings when you press the Enter key. The utility does
on of settings before you exit the utility. To change a selected
and press the Enter key.
not prompt you for confirmati
setting, you must select a different setting
Default configuration settings are applied to the server at one of the following times:
• Upon the first system po
• After defaults have been re
wer-up
stored
BSU. The system will prompt you for access to RBSU with each power-up.
Auto-co
troller mezzanine card or a direct-
h storage blade.
Default configuration settings are sufficient for proper typical server operation, but configuration settings
can be modified using R
nfiguration process
The ORCA utility is supported when using an optional Smart Array con
attac
Software and configuration utilities 40