HP ProLiant SL230s Gen8 Server - Manual (Page 62)

Hardware options installation 62
5. Install the expansion board into the slot until it seats firmly.
6. Install the FlexibleLOM riser cage (on page 20 ).
7. Connect any required external cables to the FlexibleLOM riser cage.
8. Install the server into the chassis (" Installing the server into the chassis " on page 25 ).
9. Power up the server (on page 15 ).
Connecting the SUV cable
CAUTION: Before disconnecting the SUV cable from the connector, always squeeze the release
buttons on the sides of the connector. Failure to do so can result in damage to the equipment.
Item Connector Description
1 SUV port SUV port on the server front panel
2 SUV connector For connecting to the SUV connector on the