HP Photosmart 8050xi Printer - Manual (Page 24)

If you want to… Follow these steps
Select more than one copy
of a photo 1. Insert a memory card.
2. Press Select Photos or to display the
photo you want to select.
3. Press OK once for each copy of the displayed
photo you want to print.
The number of times that the photo has been
selected appears at the bottom of the photo.
For example, if you select a photo twice, x2
appears.
Deselect one or all photos
When you deselect a photo,
the printer discards any
changes you made to the print
settings for that photo.
Note Deselecting photos
does not delete them from
the memory card.
1. Press Select Photos or to display the
photo you want to deselect.
2. Press Cancel to deselect the displayed photo
for printing. If a photo was selected multiple
times, the printer removes one selection of
the photo each time you press
Cancel .
To deselect all photos, press Cancel until a
message appears on the printer screen asking if
you want to deselect all photos. Select
Yes , then
press OK .
Select photos on a proof
sheet
After you print a proof sheet,
you can use it to select
specific photos to print.
For information about printing
a proof sheet, see
Deciding
which photos to print .
1. Select the photos you want to print by filling in
the circle below each photo with a dark pen.
2. Select the number of copies you want of each
photo by filling in the copies section. Make
sure to only fill in one choice.
3. Select a photo layout in the print layout
section. Make sure to only fill in one choice.
Once you fill out the proof sheet, scan it to print
the selected photos.
Printing your photos
If you want to… Follow these steps:
Print one photo
Before you begin, make sure
that the memory card is
inserted in the printer and the
Main tray or Photo cassette is
loaded with the correct paper. 1. Press Layout until the desired layout appears.
2. Press Select Photos or to display the
photo you want to print.
3. Press OK to select the photo.
4. Press Print to print the photo.
Print multiple photos
Before you begin, make sure
that the memory card is
inserted in the printer and the 1. Press Layout until the desired layout appears.
2. Press Select Photos or to display the
photos you want to print.
3. When a photo you want to print appears on
the printer screen, press
OK to select the
photo.
(continued)
HP Photosmart 8000 series User's Guide 21