HP Photosmart Pro B8353 Printer - Manual (Page 29)

To install or replace a print cartridge
1. Turn on the printer, open the top cover, and lift the print latch.
CAUTION The print cartridge carriage may be moving into its correct position. Be sure the
print cartridge carriage is parked at the right-hand side of the printer before removing or
installing print cartridges.
2. If you are replacing a print cartridge, grasp the installed print cartridge and slide it out of its
cradle. To ensure you are placing the new print cartridge into the correct position, verify the symbols
on the latch match the symbols on the new cartridge.
3. If you are installing a new print cartridge, remove the print cartridge from its package, and then
remove the clear nozzle protective tape by pulling on the pink pull-tab.
CAUTION To prevent clogs, ink failure, and bad electrical connections, do not touch the
print cartridge ink nozzles or copper contacts, and do not remove the copper contacts.
ENWW Using the print cartridges 19