Storage system raid configurations – HP X1000 Network Storage Systems User Manual
Page 20
If the Operating System volume is customized and the System Recovery DVD is run at a later time,
the System Recovery process will maintain the custom settings as long as the above criteria are met
(RAID level other than RAID 0 and OS logical drive size of 60 GB or higher) and the OS volume is
labeled System. If the storage system arrays are deleted and the System Recovery DVD is run, the
System Recovery process will configure the storage system using the factory default settings listed in
the table below.
HP StorageWorks X1000 and X3000 Network Storage Systems do not include preconfigured data
volumes. The administrator must configure data storage for the storage system. See “
” on page 56 for more information.
Table 2 Storage system RAID configurations
Logical Disk 1
Server model
•
Operating System Volume
•
RAID 5
•
Physical Drives 0–3
HP StorageWorks X1400 Network Storage System
(all models)
•
Operating System Volume
•
RAID 1
•
Physical Drives 0–1
HP StorageWorks X1500 Network Storage System
(base model)
•
Operating System Volume
•
RAID 5
•
Physical Drives 0–3
•
HP StorageWorks X1500 4TB SATA Network
Storage System
•
HP StorageWorks X1500 8TB SATA Network
Storage System
•
Operating System Volume
•
RAID 1+0
•
Physical Drives 0–1
•
HP StorageWorks X1600 Network Storage System
(base model)
•
HP StorageWorks X1600 3TB SAS Network Stor-
age System
•
HP StorageWorks X1600 7.5TB SAS Network
Storage System
•
Operating System Volume
•
RAID 1+0
•
Physical Drives 13–14
•
HP StorageWorks X1600 6TB SATA Network
Storage System
•
HP StorageWorks X1600 12TB SATA Network
Storage System
•
HP StorageWorks X1600 24TB SATA Network
Storage System
•
HP StorageWorks X1600 292GB SAS Network
Storage System
•
Operating System Volume
•
RAID 1+0
•
Physical Drives 0–1
HP StorageWorks X1800 Network Storage System
(all models)
•
Operating System Volume
•
RAID 1+0
•
Physical Drives 0–1
HP StorageWorks X3400 Network Storage Gateway
(all models)
Installing and configuring the storage system
20