HP DreamColor Z27x Professional Display - Manual (Page 63)

Information and Factory Reset Menus
Level 1 Level 2 Level 3 Level 4
Information Display Mode: Display Mode
Color Space: Color Space
Current Video Pipeline
Delay: xx ms
Serial Number: Serial
Number
Firmware Revision: Firmware
Revision ID
Last Calibration: xxxxx Hours
Backlight Hours: xxxxx Hours
Remote Management
Server: Enabled/Disabled
IPv4 Address:
xxx.xxx.xxx.xxx
Back
Factory Reset
Introduction to Color Calibration
The Z27x includes an internal color calibration and color management engine and does not require
software to be installed on a host computer in order to be calibrated. The following section discusses
the fundamentals of user calibration on the Z27x. A detailed discussion of calibration is covered in the
HP DreamColor Z27x Advanced User Guide.
The Z27x has been pre-calibrated at the factory to accurately display six of the most-frequently used
industry standard color spaces. In addition, all color spaces presets can be recalibrated by the user.
The following table lists the out-of-the box calibrated color space presets and provides information on
their calibrated configuration.
Preset Name Red Primary
(u’v’)
Green Primary
(u’v’)
Blue Primary
(u’v’)
White Point Gamma Luminance
sRGB 0.451, 0.523 0.125, 0.563 0.175, 0.158 D65 sRGB 250 cd/m 2
AdobeRGB 0.451, 0.523 0.076, 0.576 0.175, 0.158 D65 2.2 250 cd/m 2
BT.709 0.451, 0.523 0.125, 0.563 0.175, 0.158 D65 2.4 100 cd/m 2
BT.601 0.432, 0.525 0.130, 0.562 0.175, 0.158 D65 2.4 100 cd/m 2
BT.2020 0.557, 0.516 0.056, 0.587 0.159, 0.126 D65 2.4 100 cd/m 2
DCI P3 0.496, 0.526 0.099, 0.578 0.175, 0.158 P3 2.6 48 cd/m 2
As a display is used, the backlight ages and the light output changes. As a result, a color-critical
display must be recalibrated from time to time to ensure color accuracy. HP recommends that the
Introduction to Color Calibration 55